Shop at SprinklerWarehouse

Landscape Drip Irrigations

Drip Irrigation Parts and Instructions for all of Your Needs

Landscape Dripline Grid with XB Drip Emitters


  • Up to 60% water savings
  • No over spray damage to structures, fences, or windows
  • Supplemental XB Drip Emitters are placed next to larger plants with higher water requirements
  • Landscape Dripline is easy to install for labor savings

Click-n-Buy - Click on Part Number to Add Items to Your Cart

Part Number



Landscape Dripline 0.9 gph @ 12" spacing


3/4" Xeri Control Zone Kit

AR Valve Kit

Air Relief Valve Kit

MDCF Series

Easy Fit Compression Fittings / Adapters


Tie Down Stake
XB xx Pressure Compensating Drip Emitters (0.5 to 2.0 gph)
PT-025-050 1/4" Distribution Tubing
TS-025 w/Cap 1/4" Tubing Stake with Bug Cap

To-Do List

Time (Approx.)
Assemble Control Zone Kit and connect to water source 1 hr
Cut lengths of Landscape Dripline to build grid in planting area. 10 min per 50 feet
Connect lengths of Lanscape Dripline to Easy Fit Fittings to create grid. 20 min per 50 feet
Connect Easy Fit Adapter to Easy Fit Tee for connection to Conrol Zone Kit 5 min
Staple Landscape Dripline grid in place and flush for 2 minutes. 5 min per 50 feet
Punch self-piercing barb inlet of XB Drip Emitters into Landscape Dripline, connect 1/4" tubing to barb outlet and run 1/4" tubing to larger plant. 8 min per Emitter
Stake tubing in place and atach bug cap on the end. 3 min per Stake
Flush system for approximately 2 minutes. 2 min
Install planting material  

Installation and Maintenance Tips

Flush the zone after installation and once a year.
Install XB Drip Emitters with XM Tool for 50% faster installation.
Leave Landscape Dripline coil in the sun while preparing for installation.



Click-n-Buy - Click on Parts in Picture Below to Add Items to Your Cart

Go to Sprinkler Warehouse Go to DIY Irrigation Tutorials
Back To Previous Page